home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 2: CDPD 1
/
Almathera Ten on Ten - Disc 2: CDPD 1.iso
/
pd
/
051-075
/
074
/
less
/
less.man
< prev
next >
Wrap
Text File
|
1995-03-13
|
17KB
|
398 lines
LLLLEEEESSSSSSSS((((llll))))
NNNNAAAAMMMMEEEE
less - opposite of more
SSSSYYYYNNNNOOOOPPPPSSSSIIIISSSS
lllleeeessssssss [[[[----ccccddddeeeeppppssssttttwwwwmmmmMMMMqqqqQQQQuuuuUUUU]]]] [[[[----hhhh_n]]]] [[[[----bbbb[[[[ffffpppp]]]]_n]]]] [[[[--
--xxxx_n]]]] [[[[----[[[[zzzz]]]]_n]]]] [[[[++++_c_m_d]]]]
[[[[_n_a_m_e]]]] ............
DDDDEEEESSSSCCCCRRRRIIIIPPPPTTTTIIIIOOOONNNN
_L_e_s_s is a program similar to _m_o_r_e(1), but which allows
backwards movement in the file as well as forward movement.
Also, _l_e_s_s does not have to read the entire input file
before starting, so with large input files it starts up
faster than text editors like _v_i(1). _L_e_s_s uses termcap, so
it can run on a variety of terminals. There is even limited
support for hardcopy terminals. (On a hardcopy terminal,
lines which should be printed at the top of the screen are
prefixed with an up-arrow.)
Commands are based on both _m_o_r_e and _v_i. Commands may be
preceeded by a decimal number, called N in the descriptions
below. The number is used by some commands, as indicated.
CCCCOOOOMMMMMMMMAAAANNNNDDDDSSSS
hhhh Help: display a summary of these commands. If you
forget all the other commands, remember this one.
SSSSPPPPAAAACCCCEEEE
Scroll forward N lines, default one window (see option
----zzzz below). If N is more than the screen size, only one
screenful is displayed.
ffff Same as SSSSPPPPAAAACCCCEEEE.
bbbb Scroll backward N lines, default one window (see option
----zzzz below). If N is more than the screen size, only one
screenful is displayed.
RRRREEEETTTTUUUURRRRNNNN
Scroll forward N lines, default 1. If N is more than
the screen size, the entire N lines are displayed.
eeee Same as RRRREEEETTTTUUUURRRRNNNN.
jjjj Also the same as RRRREEEETTTTUUUURRRRNNNN.
yyyy Scroll backward N lines, default 1. If N is more than
the screen size, the entire N lines are displayed.
kkkk Same as yyyy.
dddd Scroll forward N lines, default 10. If N is specified,
it becomes the new default for all dddd and uuuu commands.
Page 1 (printed 9/1/86)
LLLLEEEESSSSSSSS((((llll)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSS((((llll))))
uuuu Scroll backward N lines, default 10. If N is
specified, it becomes the new default for all dddd and uuuu
commands.
rrrr Repaint the screen.
RRRR Repaint the screen, discarding any buffered input.
Useful if the file is changing while it is being
viewed.
gggg Go to line N in the file, default 1 (beginning of
file). (Warning: this may be slow if N is large.)
GGGG Go to line N in the file, default the end of the file.
(Warning: this may be slow if standard input, rather
than a file, is being read.)
pppp Go to a position N percent into the file. N should be
between 0 and 100. (This is possible if standard input
is being read, but only if _l_e_s_s has already read to the
end of the file. It is always fast, but not always
useful.)
%%%% Same as pppp.
mmmm_l Followed by any lowercase letter, _l, marks the current
position with that letter.
''''_l Followed by any lowercase letter, _l, returns to the
position which was previously marked with that letter.
All marks are lost when a new file is examined.
////ppppaaaatttttttteeeerrrrnnnn
Search forward in the file for the N-th occurence of
the _p_a_t_t_e_r_n. N defaults to 1. The _p_a_t_t_e_r_n is a
regular expression, as recognized by _e_d. The search
starts at the second line displayed (but see the ----tttt
option, which changes this).
????ppppaaaatttttttteeeerrrrnnnn
Search backward in the file for the N-th occurence of
the _p_a_t_t_e_r_n. The search starts at the line immediately
before the top line displayed.
nnnn Repeat previous search, for N-th occurence of the last
_p_a_t_t_e_r_n.
EEEE [_f_i_l_e_n_a_m_e]
Examine a new file. If the _f_i_l_e_n_a_m_e is missing, the
"current" file (see the NNNN and PPPP commands below) from
the list of files in the command line is re-examined.
Page 2 (printed 9/1/86)
LLLLEEEESSSSSSSS((((llll)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSS((((llll))))
NNNN Examine the next file (from the list of files given in
the command line). If a number N is specified (not to
be confused with the command NNNN), the N-th next file is
examined.
PPPP Examine the previous file. If a number N is specified,
the N-th previous file is examined.
==== Prints the name of the file being viewed and the byte
offset of the bottom line being displayed. If
possible, it also prints the length of the file and the
percent of the file above the last displayed line.
---- Followed by one of the command line option letters (see
below), this will toggle the setting of that option and
print a message describing the new setting.
VVVV Prints the version number of _l_e_s_s being run.
qqqq Exits _l_e_s_s.
The following two commands may or may not be valid,
depending on your particular installation.
vvvv Invokes an editor to edit the current file being
viewed. The editor is taken from the environment
variable EEEEDDDDIIIITTTTOOOORRRR, or defaults to _v_i.
!!!! _s_h_e_l_l-_c_o_m_m_a_n_d
Invokes a shell to run the _s_h_e_l_l-_c_o_m_m_a_n_d given.
OOOOPPPPTTTTIIIIOOOONNNNSSSS
Command line options are described below. Options are also
taken from the environment variable LLLLEEEESSSSSSSS. (The environment
variable is parsed before the command line, so command line
options override the LLLLEEEESSSSSSSS environment variable. Options may
be changed while _l_e_s_s is running via the """"----"""" command.) For
example, if you like more-style prompting, to avoid typing
lllleeeessssssss ----mmmm ............ each time _l_e_s_s is invoked, you might tell _c_s_h:
sssseeeetttteeeennnnvvvv LLLLEEEESSSSSSSS mmmm
or if you use _s_h:
LLLLEEEESSSSSSSS====mmmm;;;; eeeexxxxppppoooorrrrtttt LLLLEEEESSSSSSSS
----ssss The ----ssss flag causes consecutive blank lines to be
squeezed into a single blank line. This is useful when
viewing _n_r_o_f_f output.
----tttt Normally, forward searches start just after the top
displayed line (that is, at the second displayed line).
Page 3 (printed 9/1/86)
LLLLEEEESSSSSSSS((((llll)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSS((((llll))))
Thus forward searches include the currently displayed
screen. The ----tttt command line option causes forward
searches to start just after the bottom line displayed,
thus skipping the currently displayed screen.
----mmmm Normally, _l_e_s_s prompts with a colon. The ----mmmm command
line option causes _l_e_s_s to prompt verbosely like _m_o_r_e,
printing the file name and percent into the file.
----MMMM The ----MMMM command line option causes _l_e_s_s to prompt even
more verbosely than _m_o_r_e.
----qqqq Normally, if an attempt is made to scroll past the end
of the file or before the beginning of the file, the
terminal bell is rung to indicate this fact. The ----qqqq
command line option tells _l_e_s_s not to ring the bell at
such times. If the terminal has a "visual bell", it is
used instead.
----QQQQ Even if ----qqqq is given, _l_e_s_s will ring the bell on certain
other errors, such as typing an invalid character. The
----QQQQ command line option tells _l_e_s_s to be quiet all the
time; that is, never ring the terminal bell. If the
terminal has a "visual bell", it is used instead.
----eeee Normally the only way to exit less is via the "q"
command. The ----eeee command line option tells less to
automatically exit the second time it reaches end-of-
file.
----uuuu If the ----uuuu command line option is given, backspaces are
treated as printable characters; that is, they are sent
to the terminal when they appear in the input.
----UUUU If the ----UUUU command line option is given, backspaces are
printed as the two character sequence "^H". If neither
----uuuu nor ----UUUU is given, backspaces which appear adjacent to
an underscore character or sequences of a character
interleaved with backspaces are treated specially: the
underlined or boldfaced text is displayed using the
terminal's hardware capability. Note that the ----vvvv
option below superceeds both ----uuuu and ----UUUU.
----wwww Normally, _l_e_s_s uses a tilde character to represent
lines past the end of the file. The ----wwww option causes
blank lines to be used instead.
----dddd Normally, _l_e_s_s will complain if the terminal is dumb;
that is, lacks some important capability, such as the
ability to clear the screen or scroll backwards. The
----dddd flag suppresses this complaint (but does not
otherwise change the behavior of the program on a dumb
Page 4 (printed 9/1/86)
LLLLEEEESSSSSSSS((((llll)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSS((((llll))))
terminal).
----pppp Normally, _l_e_s_s will repaint the screen by scrolling
from the bottom of the screen. If the ----pppp flag is set,
when _l_e_s_s needs to change the entire display, it will
clear the screen and paint from the top line down.
----hhhh_n Normally, _l_e_s_s will scroll backwards when backwards
movement is necessary. The ----hhhh option specifies a
maximum number of lines to scroll backwards. If it is
necessary to move backwards more than this many lines,
the screen is repainted in a forward direction. (If
the terminal does not have the ability to scroll
backwards, ----hhhh_0 is implied.)
----[[[[zzzz]]]]_n
When given a backwards or forwards window command, _l_e_s_s
will by default scroll backwards or forwards one
screenful of lines. The ----zzzz option changes the default
scrolling window size to _n lines. If _n is greater than
the screen size, the scrolling window size will be set
to one screenful. Note that the zzzz is optional for
compatibility with more.
----xxxx The ----xxxx command line option sets tab stops every _n
positions. The default for _n is 8.
----bbbb[[[[ffffpppp]]]]_n
The ----bbbb command line option tells _l_e_s_s to use a non-
standard buffer size. There are two standard (default)
buffer sizes, one is used when a file is being read and
the other when a pipe (standard input) is being read.
The current defaults are 5 buffers for files and 12 for
pipes. (Buffers are 1024 bytes.) The number _n
specifies a different number of buffers to use. The ----bbbb
may be followed by ffff, in which case only the file
default is changed, or by pppp in which case only the pipe
default is changed. Otherwise, both are changed.
----cccc Normally, when data is read by _l_e_s_s, it is scanned to
ensure that bit 7 (the high order bit) is turned off in
each byte read, and to ensure that there are no null
(zero) bytes in the data (null bytes are turned into
"@" characters). If the data is known to be "clean",
the ----cccc command line option will tell _l_e_s_s to skip this
checking, causing an imperceptible speed improvement.
(However, if the data is not "clean", unpredicatable
results may occur.)
----vvvv The ----vvvv option tells less to print non-printing
characters in a visible way ala _c_a_t(1). Control
characters are printed as ^X (the delete character
Page 5 (printed 9/1/86)
LLLLEEEESSSSSSSS((((llll)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSS((((llll))))
(octal 0177) is printed as ^?). Characters with the
0200 bit set are printed as M- followed by the
character represented by the low order seven bits.
++++_c_o_m_m_a_n_d
If a command line option begins with ++++, the remainder
of that option is taken to be an initial command to
_l_e_s_s. For example, ++++_G tells _l_e_s_s to start at the end
of the file rather than the beginning, and ++++/_x_y_z tells
it to start at the first occurence of _x_y_z in the file.
As a special case, ++++<_n_u_m_b_e_r> acts like ++++<_n_u_m_b_e_r>_g; that
is, it starts the display at the specified line number
(however, see the caveat under the gggg command above).
If the option starts with ++++++++, the initial command
applies to every file being viewed, not just the first
one.
BBBBUUUUGGGGSSSS
When used on standard input (rather than a file), you can
move backwards only a finite amount, corresponding to that
portion of the file which is still buffered.
Page 6 (printed 9/1/86)